HPE Community
ProLiant Servers (ML,DL,SL)
1823760 Members
4290 Online
109664 Solutions
New Discussion

Error when booting in HP Proliant ML 350 G6

 
Ariful
Occasional Visitor

‎08-02-2015 11:57 PM

‎08-02-2015 11:57 PM

Error when booting in HP Proliant ML 350 G6

We got attached problem in HP Proliant ML 350 G6 when try to boot

 

As our technican suggestion we replace the slot 0 HDD. Now the server boot up with automatic recovery mode enabled. But now we got the attached LED indecation.

Please give us some solution. Thanks in advance 

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎08-03-2015 07:53 AM - edited ‎08-03-2015 08:07 AM

‎08-03-2015 07:53 AM - edited ‎08-03-2015 08:07 AM

Re: Error when booting in HP Proliant ML 350 G6

The blinking red LED means predictive failure, this disk may die soon.

 

Looks like there is no OS found.

 

When booting up, if you see "press a key to see option rom messages", then press any key.

 

If you see "Smart Array ... initializing ..." press F8 if it prompt for F8.

 

Now you can see the status of the controller and drives.

 

 


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.