Error with HP Proliant ML 350

[Atul Sharma (New)]

Recently we have attached an additional NIC to our SAP server HP Proliant ML-350. We run Microsoft SBS 2003 sp2. After installing it we get an error 0x000000d1(0x00000040,0xd0000002,0x00000000,0xba935407) with blue screen. Please advise.
Atul Sharma
Cell No. 98103 93941

[mejdi]

Hello !

After insttaling Windows SBS 2003,the PSP 8.20 was installed or not ? if not, this is a link for instal it, for optimise the fonction of your server, (PSP containe all driver, HP agents and consol of supervisor like ACU, ADU and SMH)
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=1121586&prodNameId=3279711&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-694c39451f604a7ba36ff61586
**********************
can u provide me the
reference of the network card?
reference of the server (ML350 G? 2,3,4,5) ?

Best regard
MZ

[Atul Sharma (New)]

Please note it is HP Proliant ML 350 (G5). Also details of additional NIC is as follows :
a. D-Link DGE-530T
- IEEE 802.3ab 1000Base-T Gigabit Ethernet Std
- 32-bit PCI Local Bus Master Architecture
- ACPI/Wake-on-lNA function complaint
- Support IEEE802.3x Flow control
- Support Half and Full Duplex
- Support NWAY Auto-Negotiation
- PCI 2.2
- SNMP V1
- 802.1Q VLAN
- Universal Bus Support 3.3V and 5V
- Plug and Play Installation

Please note that our default NIC (first one) was 10/100mbps

Atul Sharma

[Graeme Bray]

Are you running a Smart Array E200 Controller in this server?

If so, you may want to check out this customer advisory:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01725956

http://support.microsoft.com/default.aspx?scid=kb;EN-US;969550

They recommend to update the E200 Controller to 1.82 and install the following storport driver (obtained by contacting Microsoft)
http://support.microsoft.com/kb/950903