Extend Storage Space from current RAID array after replacing HDDs with bigger size

[nhathq]

I have one server, HP DL360 G9 with the current RAID 6 array with: (RAID card P440ar)

- 01 x 1.2 TB 10k SAS drive

- 04 x 300 GB 10k SAS drive

Recent days, I replaced 04 1.2 TB 10k SAS drive for the 04 300GB drive. Now I want to extend the current logical volume of storage from the current RAID Array without re-configuring RAID array (because I want to keep the current state of system). I have no server which is available to make some test in BIOS utility because all servers are running for product environment. Can anyone help me to find out a solution or give me some guide for this case?

Thanks in advance

[Lucy_Ellis]

you can do what you want using HPE Smart Storage Administrator.  Look to the Smart Array online array expansion.  The User guide for HPE SSA can be found here:  http://www.hp.com/ctg/Manual/c03909334