Hello,
You may login into the server's UEFI System Utilities and navigate to iLO Configuration and check if the IP address configured is what is being used and is as per the networking configuration.
Ensure that the iLO port is connected to the management network.
Also, you may check the network cable is working correctly by swapping a known working one.
Regards,
I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[All opinions expressed here are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Hi,
there is also the possibility of setting a DIP Switch on the Motherboard.
This enables (for Recovery) Login without a Password.
After that, you can set new Passwords and switch back.
You don't tell us about your server model and iLO Version, so you must search for the switch yourself.
There is usually a sticker on the lid that explains the switch.
Are you able to connect and log in via SSH?
Cali
I'm not an HPE employee, so I can be wrong.
Sorry, I'm unable to open the Pictures.
You can use Options to edit your Post and add the Picture directly using:
I'm not an HPE employee, so I can be wrong.