failure to conrep script bios param on dl380 g7

[joseph pareti]

conrep has been used to reset hzpertreading param in bios but it did not work.

On current Proliant G7 the setting is called Intel Hyperthreading, but in a sample file â Hyperthreading â is used with a note that it can only be used on older models.
Usage of the option â Hyperthreadingâ is not effective; usage of â Intel Hyperthreadingâ leads to an error message.

[Jimmy Vance]

syntax for G6 and G7

Enabled

syntax for G5 and earlier

Enabled

[joseph pareti]

Thanks, however the problem persists:

conrep -l -f bios.xml
conrep 3.30 - SmartStart Scripting Toolkit Configuration Replication Program
Copyright (c) 2007-2009 Hewlett-Packard Development Company, L.P.

System Type: ProLiant DL380 G7
ROM Date : 08/16/2010
ROM Family : P67
Processor Manufacturer : Intel



XML System Configuration : conrep.xml
Hardware Configuration : bios.xml

File contains global platform restrictions
Global Restriction: [minimumconrepversion ] OK


Platform check:
: [ProLiant DL120 G7 ] no match
: [ProLiant ML110 G7 ] no match
: [ProLiant DL3 ] match
: [ProLiant ML3 ] no match
: [ProLiant DL5 ] no match
: [ProLiant ML5 ] no match
: [ProLiant DL7 ] no match
: [ProLiant DL9 ] no match
: [ProLiant BL ] no match
: [ProLiant XW ] no match
: [ProLiant WS ] no match
: [ProLiant SE ] no match
: [ProLiant SL3 ] no match
This entry (Diskette_Boot) needs the Toolkit I/O driver to be loaded to be supported.
This entry (NumLock) needs the Toolkit I/O driver to be loaded to be supported.
This entry (POST_Speed_Up) needs the Toolkit I/O driver to be loaded to be supported.
This entry (Integrated_Diskette_Controller) needs the Toolkit I/O driver to be loaded to be supported.
This entry (PCI_Bus_Reset) needs the Toolkit I/O driver to be loaded to be supported.
This entry (Hot_Plug_Reservation) needs the Toolkit I/O driver to be loaded to be supported.
This entry (Memory_Protection) needs the Toolkit I/O driver to be loaded to be supported.
This entry (Automatic_Poweron) needs the Toolkit I/O driver to be loaded to be supported.
This entry (USB_Capability) needs the Toolkit I/O driver to be loaded to be supported.
This entry (PCI_Enumeration_Method) needs the Toolkit I/O driver to be loaded to be supported.
This entry (Intel_Processor_Core_Disable) needs the Toolkit I/O driver to be loaded to be supported.
This entry (Intel_QPI_Link_Power_Management) needs the Toolkit I/O driver to be loaded to be supported.
This entry (Maximum_Memory_Bus_Frequency) needs the Toolkit I/O driver to be loaded to be supported.
This entry (Memory_Interleaving) needs the Toolkit I/O driver to be loaded to be supported.
This entry (Intel_PCI_Express_Generation_20_Support) needs the Toolkit I/O driver to be loaded to be supported.
This entry (Intel_TPM_Functionality) needs the Toolkit I/O driver to be loaded to be supported.
This entry (Intel_TPM_Visibility) needs the Toolkit I/O driver to be loaded to be supported.
This entry (Intel_TPM_Expansion_ROM_Measuring) needs the Toolkit I/O driver to be loaded to be supported.
This entry (Node_Interleaving) needs the Toolkit I/O driver to be loaded to be supported.
This entry (Intel_Hyperthreading) needs the Toolkit I/O driver to be loaded to be supported.
This entry (PCI_Bus_Padding_Option) needs the Toolkit I/O driver to be loaded to be supported.
This entry (Memory_Speed_with_2_DIMMs_per_Channel) needs the Toolkit I/O driver to be loaded to be supported.
This entry (QPI_Bandwidth_Optimization) needs the Toolkit I/O driver to be loaded to be supported.

Loading configuration from bios.xml.
Unsupported Keyword on line 2: