Firmware Bug with SNMP (ILo 5, 3.0.0) , ProLiant DL380 Gen10, HPE Smart Array P408i-a G10

[SearchForTheCod]

Hello

I have several servers where my snmp monitoring stopped working after updating to ILO5 firmware 3.0.0. 

After many tests i found out that the problem is , that only the controller OIDs stopped working. All other information on logical and physical disks still works, so its not a general problem.

The used controller is HPE Smart Array P408i-a SR G10 with the latest firmware 6.2.2.

Here is a picture:

You can see the DAControler Entries dont deliever any results but the other OIDs do.

I have this issue on several servers after upgrading to firmware 3.0.0 with ILO5. Is this a known problem? ( oh within the ILO UI , the status of the controller is available )

[thutchings]

Hello,

There are multiple cases opened for this behavior after upgrading to 3.00 with HPE, including iLO Development. There is no feedback right now regarding any fix.

Regards

[SearchForTheCod]

Good to know that is not an error done by myself,  so there should be a fix expected with the next firmware release.

Thanks for the response!

[Throwaway]

@SearchForTheCod 

Can you tell me the name of the application you are using in the screenshot? It looks useful.
I found this thread because we are also seeing snmp issues..

[SearchForTheCod]

This is the MIB Browser from ireasoning

[huyy]

My cu have the same question;
I adviced him update p408i-a fw to 6.52,the problem is solved, hope can help u

[Throwaway]

I used this tip from @huyy and it helped with at least now are seeing disk space reported through snmp, but still having issues with temperature not reporting