HPE Community
ProLiant Servers (ML,DL,SL)
1822543 Members
2990 Online
109642 Solutions
New Discussion

Ghost Imaging Raid Arrays

 
Dean Sugiyama
New Member

‎08-22-2003 08:51 AM

‎08-22-2003 08:51 AM

Ghost Imaging Raid Arrays

Is it possible to use Norton Ghost to image a raid array to an IDE hard drive then replace the older raid array with a new larger raid array and image from the ide hard drive to the new raid array? I'm trying to avoid having to rebuild the server entirely. Thanks for stopping by.
0 Kudos
Reply
1 REPLY 1
Gert Luyten
Respected Contributor

‎08-24-2003 09:14 AM

‎08-24-2003 09:14 AM

Re: Ghost Imaging Raid Arrays

This is not possible since there is no RAID driver for DOS available.
The easiest way would be - if you have RAID1 selected for the OS drive - to:
- shut down the server
- remove 1 drive from the R1 array
- restart the server
- insert another drive for the R1 to rebuild

Now you have a complete copy that you can use to recover your server in case of disaster. You can repeat this process whenever the OS gets updated.
A Proliant a day keeps the competition away!
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.