HC-250 (ProLiant XL170r Gen9) Hyper-Converge Node Malfunction

[Nabeel1]

One of our Hyper-Converged nodes is malfunctioning and giving power related errors in ILO logs.

Below is the Integrated Management Log.

"101","Critical","System Error","01/01/1970 14:17","01/01/1970 14:17","1","Server Critical Fault (Service Information: Power On Fault, System Board, P12V Main/AUX Regulator 1 (10h))",
"100","Critical","System Error","01/01/1970 00:21","01/01/1970 00:21","1","Server Critical Fault (Service Information: Power On Fault, System Board, P12V Main/AUX Regulator 1 (10h))",
"99","Critical","System Error","01/01/1970 00:02","01/01/1970 00:02","1","Server Critical Fault (Service Information: Bad Fuse, System Board, P12V Main/AUX Regulator 1 (10h))",
"98","Critical","System Error","01/01/1970 00:01","01/01/1970 00:01","1","Server Critical Fault (Service Information: Bad Fuse, System Board, P12V Main/AUX Regulator 1 (10h))",

[Suman_1978]

Hi,

These errors come up when there is an issue with Power supply/cord/power backplane or even system board.

If possible and available, please try with another similar power supply or power cord.

Please refer to this community post for suggestions.

Thank You!
I work with HPE but opinions expressed here are mine.
HPE Tech Tips videos on How To and Troubleshooting topics

[Sunitha_Mod]

Hello @Nabeel1,

Let us know if you were able to resolve the issue.

If you have no further query and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.