ProLiant Servers (ML,DL,SL)
1824298 Members
5335 Online
109669 Solutions
New Discussion юеВ

Help change to IT mode hba in HPE Smart Array P408i-a

 
Yemencit
New Member

Help change to IT mode hba in HPE Smart Array P408i-a

Hi
I have server Hp dl380 g10 need change raid controller HPE Smart Array P408i-a work to it mode hba can you help me for that
Thank you
3 REPLIES 3
TVVJ
HPE Pro

Re: Help change to IT mode hba in HPE Smart Array P408i-a

Hello,

For changing the controller mode, please refer to the section "Enabling embedded chipset SATA controller support" of the UEFI System Utilities User Guide for HPE ProLiant Gen10, ProLiant Gen10 Plus Servers, and HPE Synergy.

Regards,



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[All opinions expressed here are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
support_s
System Recommended

Query: Help change to IT mode hba in HPE Smart Array P408i-a

System recommended content:

1. HPE Smart Array SR Gen10 User Guide

2. HPE Smart Array P408i-c SR Gen10 Controller

 

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

 

Thank you for being a HPE valuable community member.


Accept or Kudo

Torsten.
Acclaimed Contributor

Re: Query: Help change to IT mode hba in HPE Smart Array P408i-a

Since these controllers are in mixed mode there is nothing to change at all.

If a drive is not in a RAID array it is visible to the OS as a physical drive.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!