ProLiant Servers (ML,DL,SL)
1748051 Members
5171 Online
108758 Solutions
New Discussion

Re: How to update Ilo firmware for DL380p Gen 8

 
SOLVED
Go to solution
eholz1
Occasional Advisor

How to update Ilo firmware for DL380p Gen 8

Hello Members,

I have an HP Proliant DL380p running iLo firmware 2.4. I would like to upgrade it to 2.7b.

This box is an esxi host running vsphere 6.0. I have found an CP*.scexe file, but it is for Red Hat x64.

Would this file be the same for vsphere 6.0? Where would I expand this file? or would I copy the file to the esxi host via ssh, and do an "sh CPXXXX.scexe", etc.

Thanks,

ewholz

 

4 REPLIES 4
Torsten.
Acclaimed Contributor

Re: How to update Ilo firmware for DL380p Gen 8

Better get the Windowsversion, rxtract it and use the *.bin file within the web interface.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Jimmy Vance
HPE Pro
Solution

Re: How to update Ilo firmware for DL380p Gen 8

 

You can extract the firmware file from either the Linux rpm or the Windows download and update via the web interface

Windows 
https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_f13420b102cb4101ab1befc470

Linux
https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_a036734f9509476182a7980c31

No support by private messages. Please ask the forum! 
eholz1
Occasional Advisor

Re: How to update Ilo firmware for DL380p Gen 8

Thanks for the info - both posts are the solution

eholz1
Occasional Advisor

Re: How to update Ilo firmware for DL380p Gen 8

Thanks for reply - both the posts are the solution!

 

eholz1