HP ML370 G6 ROM Setup not configurable.

[hobbitis]

Hi,

This might probably sound surprising or but I have now spend some time trying to resolve the following issue:

I am trying to change the boor order on my HP ML360 G6 CMOS setup. However, everything is grayed out. 

Not only can I not change the boot order in the CMOS but everything else too is grayed out.

I have used the a newer HP Smart Update Firmware DVD (ver.9.20B) but the problem still remains.

Hope this is enough info to get to the bottom of this hiccup.

Thanks.

[Johan Guldmyr]

Hello, 

sounds to me like there's a password set in the BIOS.

You could try to clear the NVRAM via the system maintenance switch

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01711820/c01711820.pdf

page 106.