HP Proliant DL 380 Gen10 Server OS installation

[mohammadhiz]

Hey Everyone ,

I am trying to install OS Redhat Enterprise Server 5.4 on HP proliant Gen10 DL380. But when ever I selct  boot device CD-ROM OR  my San Disk USB front Device it took me into one time boot menu.  from that menu also i cheked everything is fine but its not booting.

can anyone help me my bootable device is detecting but after selcting its not booting from that device.

just redirecting me into one time boot menu again and again.

many thanks in advance

[Jimmy Vance]

---

@mohammadhiz wrote:

Hey Everyone ,

I am trying to install OS Redhat Enterprise Server 5.4 on HP proliant Gen10 DL380. But when ever I selct  boot device CD-ROM OR  my San Disk USB front Device it took me into one time boot menu.  from that menu also i cheked everything is fine but its not booting.

can anyone help me my bootable device is detecting but after selcting its not booting from that device.

just redirecting me into one time boot menu again and again.

many thanks in advance

---

RHEL 5.x does not support UEFI booting which is why it just drops back top the boot menu..  The minimum supported RHEL versions for the DL380 Gen10 are listed here http://h17007.www1.hpe.com/us/en/enterprise/servers/supportmatrix/exceptions/rhel_exceptions.aspx#.XKs0MZhKiF4

Minimum Operating System Requirements
ProLiant DL380  Gen10	

RHEL 6.9
RHEL 7.3 sub notes 1,2	

1 This server requires minimum of kernel 3.10.0-514.6.1.el7.x86_64 from Red Hat. This update is available to active subscribers as an errata from the Red Hat Network. Please see RHSA-2017:0086 for details.

2 Driver update for the Matrox G200eH3's video driver is required. Driver mgag200 is available from Red Hat's Network for RHEL7.3 x86_64. Please see RHEA-2017:1730 for details.