HP Proliant DL160 Gen9 ILO issue

[Mar_10]

Dear Support Team,

We bought recently an HP Proliant DL160 Gen9 server, not including the ILO port. It have only 2 NICs.

We are using bonding on those 2 NIC, and we want to manage the server by ILO functionaltiy.

Should we buy the ILO module or we can use one of the NIC existing to use it ?

Regards

[Jimmy Vance]

NIC teaming (bonding) and using shared iLO port is supported. Refer to the following advisory. Depending on the bonding mode, you might need the optional dedicated iLO port

http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-c04822945

Document ID: c04822945

Version: 1

Advisory: Integrated Lights-Out (iLO) - iLO 2, iLO 3 and iLO 4 May Not Be Reachable Via the Network if Configured To Use the Shared Network Port With the NIC Configured for HP ProLiant Network Adapter Teaming