HP Proliant DL360 Gen 10 - Raid 10 auto replace spare drive configuration via HPE Oneview

[mclass]

I've been researching and testing using HPE Oneview to manage and configure our servers. I've configured a server profile template and am copying that to create an individual server profile for each server I am setting up. We have been configuring our servers manually and we are evauluating using Oneview moving forward. I see some benefit to this for provisioning however am finding the information on configuring profiles lacking when it comes to settings available in the BIOS of the server. We want the local storage on these servers setup in Raid 10 with a spare that is assigned to auto replace. I've been banging my head against the wall trying to find any information on if this is possible via Oneview. Is this possible? Or should I just leave an local storage settings our of my server profile template and just configure it manually after the server is provisioned via the profile? 

Thanks

[Sunitha_Mod]

Hello @mclass, 

We have responded to your primary post here, please check. 

[ksram]

Hi @mclass,

Good day!

Please refer the thread : https://community.hpe.com/t5/hpe-oneview/hp-proliant-dl360-gen-10-raid-10-auto-replace-spare-drive/td-p/7182114#.Y-mT0HZBxM0

Thank you
RamKS