HPE Community
ProLiant Servers (ML,DL,SL)
1819847 Members
2456 Online
109607 Solutions
New Discussion

Re: HP Proliant DL360 Gen9 Processor Kit Removal

 
cidic
Advisor

‎07-10-2017 07:25 PM

‎07-10-2017 07:25 PM

HP Proliant DL360 Gen9 Processor Kit Removal

Hi Geeks,

I have the above server with x 2 Intel Xeon E5 2600 Series processor socket but I want to remove one of the processor so that only one will be licensed by my VMWare esxi key(for 1 cpu).  

I have tried removing one processor kit but the machine wont power on again so I fitted it back in and it is working again. Is this workable(Removing a processor kit/socket)?

Thanks

 

0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

‎07-10-2017 08:56 PM

‎07-10-2017 08:56 PM

Re: HP Proliant DL360 Gen9 Processor Kit Removal

remove cpu2, cpu1 must be installed. for better cooling, install the blank.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
cidic
Advisor

‎07-10-2017 10:35 PM

‎07-10-2017 10:35 PM

Re: HP Proliant DL360 Gen9 Processor Kit Removal

Hi Torsten,

 

Thank You  - will try and revert back.

 

Cidic

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.