HP ProLiant DL380 G7 not Responding to OIDs

[Giridar_SL]

Hi All,

 I have a HP ProLiant DL380 G7  and installed the below but is not reponding to OIDs in  CPQIDA MIB

iLO 3/4 Channel Interface Driver
iLO 3/4 Management Controller Driver
HPE Insight Management Agents

but have a HP ProLiant DL380p G8 which is respnding 

[SanjeevGoyal]

Hello,

I hope the below link will help you.

HP Systems Insight Manager - Finding Object Identifier (OID) of Components on ProLiant Servers https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c01430245

or http://h18013.www1.hp.com/products/servers/management/hpsim/mibkit.html

HP Support Center - Hewlett Packard Enterprise.

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c04272529

If you feel this was helpful please click the KUDOS! thumb below!   

Regards,

[Giridar_SL]

thank you

[Giridar_SL]

thank you but it doens't seem to be working

have 2 servers one is responding and the other is not

[SanjeevGoyal]

Hello,

The server should be updated with the latest bios and firmware.

I would suggest you to have a proper case be logged with HPE, and share the appropriate logs for further analysis.

If you feel this was helpful please click the KUDOS! thumb below!   

Regards,