HP Proliant ML110 G7 UID lit Automatically, not able to get out of the UID Mode.

[PrasadNd]

HI guys,

I have HP Proliant ML110 G7 Server with Windows Server 2008 R2 SP1 Installed. Yesterday i've installed Genetec (Video Management System) for our needs, just after the installation completes the server went to UID mode.

I can't able to come out of the UID mode even i tried unplugging the power chord and replug. 

Please help me to solve the issue....

Thanks in Advance....!

[Suman_1978]

Hi,

If you have iLO3 in this server, then you may have an option to switch OFF the UID led.

You can also try updating the iLO3 firmware, please see this advisory:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c03127321

Thank You!

I am a HPE employee
_________________________________________
Was the post useful? Click on the white KUDOS! Thumb below.  Kudos is a way of saying thank you to a post.
// Useful Links for ProLiant Servers / Community FAQ / Rules of Participation / Servers Blog //