ProLiant Servers (ML,DL,SL)
1823451 Members
2558 Online
109655 Solutions
New Discussion

HP ProLiant ML110G7 in Power Standby

 
aeyjay
Occasional Contributor

HP ProLiant ML110G7 in Power Standby

I just had circuit break flip. When it flipped I heard a pop where my server and desktop are located. After returning from resetting my breaker, I started turning everything back on. All item turned on as always except my server. I started troubleshooting and even replaced my system battery. I have back ups on external drives. I have searched several forums and saw the same issues a blinking light near the system maintenance switch. The power button amber, the power status amber, system health LED is green, and the UID turns blue when pressed.

1 REPLY 1
MV3
HPE Pro

Re: HP ProLiant ML110G7 in Power Standby

Hi Aeyjay

Good day!

Did you try reseating the Power supply 1 and 2.

Do a Power drainand check if the server is powering on. Remove all the power cables and Press and hold the power button for 10-15 sec.
Reseat the power cables and check for the issue.

Do revert back with the outcome.

Cheers.



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo