HP PROLIANT ML350 G4P compatibility 3.5 inch SAS disks

[epopovx]

Hello, could you help me figure out in compatibility 3.5 inch SAS disks.
Need to find SAS/SATA disks for server
HP PROLIANT ML350 G4P
Product number:470063-980
Disk controller product number: 347786-B21

What I've found for this controller:

SAS Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives

HP 600GB 6G SAS 15K rpm LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive                516828-B21
HP 450GB 6G SAS 15K rpm LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive                516816-B21
HP 300GB 6G SAS 15K rpm LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive                516814-B21

SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives

HP 600GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive    516830-B21
HP 450GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive    516826-B21
HP 300GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive    516824-B21

SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives

HP 2TB 6G SAS 7.2K rpm LFF (3.5-inch) Dual Port Midline 1yr Warranty Hard Drive          507616-B21

And question in may I use any from this list to my server.
Will fit these disks to standart SATA/SAS hard drive cage (p/n: 390547-001)?

Thanks for answer.

[Goutham_Sabala]

Im not sure where you find those part numbers from, it is always recommended to look into the quick specs of the server itself to see the drives that are supported, search for hard drive sub-section and you will find the hard drive numbers that are supported on the server, it depends on what controller you are using , if the controller supports both SATA and SAS and then yes you can use either hard drives on the server

http://h18004.www1.hp.com/products/quickspecs/12199_div/12199_div.html