ProLiant Servers (ML,DL,SL)
1823740 Members
2621 Online
109664 Solutions
New Discussion

HP Proliant Server Bios Raid 10 , Raid 1 oder Raid 0 was only avaible

 
Cheyenne123
Occasional Contributor

HP Proliant Server Bios Raid 10 , Raid 1 oder Raid 0 was only avaible

Hello everyone,

 

We purchased a new server (Proliant 380 Gen 10) with 6 local SSD hard drives. I wanted to have the disks set up with Raid 5 but unfortunately I couldn't. In the bios I only see the 3 options. Can someone please tell me why? or does the raid controller only support the 3 variants (raid 0,1, 10)? Thanks in advance for the answers.

 

Best Regards

Cheyenne123

4 REPLIES 4
Suman_1978
HPE Pro

Re: HP Proliant Server Bios Raid 10 , Raid 1 oder Raid 0 was only avaible

Hi,

Please use Intelligent Provisioning to configure RAID.
Also check if all the SSD's are detected.  Check cabling.

Thank You!
I work with HPE but opinions expressed here are mine.
HPE Tech Tips videos on How To and Troubleshooting topics



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
Cheyenne123
Occasional Contributor

Re: HP Proliant Server Bios Raid 10 , Raid 1 oder Raid 0 was only avaible

Hello Suman,

 

thanks for your answer i 'll try it. i'll get in touch.

PDP-Fan
Valued Contributor

Betreff: HP Proliant Server Bios Raid 10 , Raid 1 oder Raid 0 was only avaible

Normally the suggested RAID levels depend on the number of drives you have. Do you see all six SSD's and did you select them all?
The other question is what Smart Array controller you have... some "entry level" models (cheap models) need an additional license to use anything better that 0 or 1 or 10.

OK... they call it "essential" and "performance"...

Essential RAID Controller
• HPE Smart Array E208i-a SR Gen10 Controller
• HPE Smart Array E208i-p SR Gen10 Controller
• HPE Smart Array E208e-p SR Gen10 Controller
Performance RAID Controller
• Broadcom MegaRAID MR416i-a Controller for HPE
• Broadcom MegaRAID MR416i-p Controller for HPE
• Broadcom MegaRAID MR216i-a Controller for HPE
• Broadcom MegaRAID MR216i-p Controller for HPE
• HPE Smart Array P408i-a SR Gen10 Controller
• HPE Smart Array P408i-p SR Gen10 Controller
• HPE Smart Array P408e-p SR Gen10 Controller
• HPE Smart Array P816i-a SR Gen10 Controller

***********************************************
"If it seems illogical... you just don't have enough information"
Cheyenne123
Occasional Contributor

Betreff: HP Proliant Server Bios Raid 10 , Raid 1 oder Raid 0 was only avaible

 @PDP-Fan first thanks for your answer i think I definitely have cheap controller, thats means do i have to buy license or new Controller ?