Query: HP Proliant Server ML110 Gen11 no controllers found

[WayneBen]

I have a brand new server HP Proliant Server ML110 Gen11 giving me the no controllers error, I have installed the latest SPP still facing same error wether i go to F9 and try to setup, there is still no controller being detected. Please help am just a newbie to these HP servers.

[support_s]

System recommended content:

1. HPE ProLiant ML110 Gen11 Server User Guide | Preparing the server for storage controller installation

2. ProLiant ML110 Server Network Operating System Installation Guide

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[TVVJ]

Hello,

This server features embedded storage controller that supports SATA RAID which is Intel VROC SATA for HPE ProLiant Gen11 servers.
Please refer to the document "Intel Virtual RAID on CPU for HPE User Guide" for more information.

Regards,

[WayneBen]

Hello @TVVJ ,

I do not seem to have the intel vroc option even after I have selected Vroc in the bios, i have tried including the drivers in my bootable windows installation but it is not picking upsome of the drivers when I browse for the folder during installation, the furthest i have gone is after selecting a driver the windows installation mediagives me a this pc needs to restart (Blue screen of death).

[WayneBen]

There is no option to createa raid in the inte vroc option

[Mr_Techie]

---

@WayneBen wrote:

Hello @TVVJ ,

I do not seem to have the intel vroc option even after I have selected Vroc in the bios, i have tried including the drivers in my bootable windows installation but it is not picking upsome of the drivers when I browse for the folder during installation, the furthest i have gone is after selecting a driver the windows installation mediagives me a this pc needs to restart (Blue screen of death).

---

Follow these suggestion and see if it helps: 

Verify VROC Key and NVMe Drives

Double-check your BIOS configuation

When integrating drivers into your Windows installation media, make sure you are using the correct drivers for your hardware..

For more information you can find this troubleshooting guide that could help you better: 

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=sd00002310en_us

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

[WayneBen]

My issue has not yet been resolved

[Mr_Techie]

@WayneBen

Try to Reset the RAID Configuration.

Inspect the Hardware

Use HPE Smart Storage Administrator (SSA) from Bootable Media

Check Controller Physical Installation

If you still  have the issue, please contact the HPE Support 

[WayneBen]

My Appoliogies had to send the Server to HP Warrantee the issue got resolved even though it took time. Thank you

[Thaufique_Mod]

Hello @WayneBen,

Thanks for keeping us updated and for your patience.