ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Re: HP Smart Array P410/P411 without RAID

 
Highlighted
Advisor

HP Smart Array P410/P411 without RAID

Hello,

I try to use HP proliant dl380 G7 like proxmox server on zfs

i have unity SAS 300 Go in my server

I cannot see hard disks if I do not configure a logical unity RAID
Can you please tell me how I can operating système can see physical disks SAS without Smarat array?

KIng regards

3 REPLIES 3
Highlighted
Honored Contributor

Re: HP Smart Array P410/P411 without RAID

The P410/P411 in the G7 do not have a non RAID HBA mode

No support by private messages. Please ask the forum! 
Highlighted
Honored Contributor

Re: HP Smart Array P410/P411 without RAID

As stated above the p410/p411 doen't have a HBA-mode (Non-raid). The only option to see the individual harddrives in the Operating system with the p410/p411 is to create a Raid 0 for each harddrive.

Highlighted
New Member

Re: HP Smart Array P410/P411 without RAID

Old post, but I have 5 x P411 controllers that are stuck in HBAMode.

Does anyone know how to get them back into RAID mode?

It appears that these cards may have come from an Integrity server where the system utilities allow changes to hbamode. 

The latest SSA and SSACLI in SP will not allow hbamode to be turned off (unsupported apparently).

Latest firmware 6.64 has been applied, tried everything but still no success.

Any suggestions???