HP Smart Array P410i "Saving Configuration..." Taking Forever

[jonathan3]

Howdy, 

Decided to purchase an HP DL380 G7 off of eBay some time ago. It worked all right. I decided to swap out all of the drives for larger capacity ones, but when creating a logical drive in RAID 10, it gets stuck on "Saving configuration." 

The drives are 600GB each, with a total of 8, so I don't think it should take days to complete. 

Thanks,

Jonathan

[sudhirsingh]

Hi,

Looks unusual,

Please try following,

Do Power cycle and retry,

Update Controller firmware then check,

Boot with SmartStart CD then try to configure.

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_2e6c41afdb8c4c0d9bffce484c&swEnvOid=4064#tab-history

Hope this helps!

Regards,

Sudhir