HpCISSs2 Error 129 on ML110 with E200/128

[Dennis Mauch]

Hi there,

we use a ML110G4 with an E200/128 Controller running SBS2008. Patch Level and Drivers are up to date.
Since two weeks the integrated SBS2008 Backup fails, while the error log states a 129 error from HpCISSs2 (reset to device \Device\RaidPort0 was issued), followed by an Error 11 from disk (controller error on \Device\Harddisk0\DR0). These Errors only occur during backup hours. Backup target is a external USB HDD, attached is an ACU diagnostics report FYI.

Im a little bit helpless on this, any ideas?
Greetings, Dennis

[Juan_huayane]

Hello

As Solicitousness Error. I have the same problem

thanks