HPE DL380 Gen10 Plus - workload profile for Openshift 4.x Worker node

[AGMENON]

Dear Community 

We are going to deploy Openshift 4.x Worker nodes on  HPE DL380 Gen10+ servers

Which workload profile should we choose  ? 

Appreciate your quick response as always  

Thanks

Anand 

[Suman_1978]

Hi,

May be you should post this question on Openshift community.
If I see this guide from Openshift, Workload Type

Server - Balances performance and it is compatible with a wide range of server workloads. Use this template class or the Desktop template class to prioritize VM density over guaranteed VM performance.

Thank You!
I work with HPE but opinions expressed here are mine.
HPE Tech Tips videos on How To and Troubleshooting topics

[AGMENON]

Dear Suman

Thanks for helping out 

Infact , my question was more about the Workload profile to be set on the HPE Server Bios   as mentioned in  https://techlibrary.hpe.com/docs/iss/proliant-gen10-uefi/GUID-0F617844-8783-4C74-B8A0-86246A1E723F.html    

eg:- General Power Efficient Compute , Virtualization - Max Performance , High Performance Compute (HPC) etc  

I reached out to openshift community and they suggested to contact HPE as the hardware is HPE owned  and normally hpe has reference architectures for OCP 

I dont find any reference architecture for Openshift on HPE DL380 Gen10 + and hence the question  

Thanks in advance for your continued support 

[Suman_1978]

Hi,

Not much info in this regard, I could not find a direct answer for your question, but here are some doc references.

OpenShift 4 Partner Reference Architectures, check the HPE Partner info.
HPE Reference Architecture for Red Hat OpenShift on HPE ProLiant DL380 Gen10 and HPE ProLiant DL360 Gen10 Servers, page# 11

If you still need help, please contact HPE Support or Reseller.

Thank You!
I work with HPE but opinions expressed here are mine.
HPE Tech Tips videos on How To and Troubleshooting topics