HPE Ethernet 10Gb 2-port 562SFP+ Adapter 1Gb communication possible?

[showtime]

Hi

I installed the HPE Ethernet 10Gb 2-port 562SFP + Adapter on the DL380 G10 server. (10Gb SFP+ Transceiver)

customer's network is 1Gb communication

HPE Ethernet 10Gb 2-port  562 adapeter's quick spec,

Here is the phrase:

Operates at 1 Gbps/10 Gbps, auto-negotiation, on both ports

Then there is no problem with 1Gb communication ?

[AmRa]

Hi

Yes, you are correct the HPE Ethernet 10Gb 2-port 562SFP+ Adapter Operates at 1 Gbps/10 Gbps, auto-negotiation, on both ports.

As best practices, make sure that both sides of the link are configured the same way.

If one (Server) side of the link is set to auto-negotiation, make sure the other (Switch) side is also set to auto-negotiation.

And  If one side is set to fixed speed, make sure the other side is also set to fixed speed.

[Jimmy Vance]

---

@showtime wrote:

Hi

I installed the HPE Ethernet 10Gb 2-port 562SFP + Adapter on the DL380 G10 server. (10Gb SFP+ Transceiver)

customer's network is 1Gb communication

HPE Ethernet 10Gb 2-port  562 adapeter's quick spec,

Here is the phrase:

Operates at 1 Gbps/10 Gbps, auto-negotiation, on both ports

Then there is no problem with 1Gb communication ?

---

To get 1GB speed you will need to install a 1Gb transciever.  The one I've used in the past is 453154-B21 HPE BladeSystem c-Class Virtual Connect 1G SFP RJ-45 Transceiver  Not sure I've used one with this NIC, but It's where I'd start