hpe ethernet 1gb 4-port 369i drive not work

[GioGio]

Hello

we have buyed a ML350 Gen 10 server with hpe ethernet 1gb 4-port 369i. So i have try to download all driver fot it and winserver 2019 withour result. Or the driver not see the hardware or not work for OS.

Some help?

Thanks

[StorageMike]

Please can you confirm which version of driver you've installed

Have you tried the following - https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_1ea2311e42014ac1ab5a74a109#tab4

[ksram]

Hi @GioGio ,

Please set the Network speeds to 1Gb/s, and set the switches to Auto-Negotiation.

If auto-negotiation still does not work, then it should be set to "forced 1Gb/s".

Looks like these network adapters can only support 1Gb/s network speed, and cannot support speeds of 100Mb/s and 10Mb/s.

Refer the Article : https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00038759en_us

Thank you

If you feel this was helpful please click the KUDOS! Thumbs below!

[dakof]

I have the same problem

I acquired two HP proliant ml350 gen10 servers, the network cards appear at the control panel, but when you plug in a network cable there is no led light as if no cable is connected

[ksram]

Hi @dakof 

Looks like the issue is same as we discussed on this thread. Plese note that these network adapters can only support 1Gb/s network speed, and cannot support speeds of 100Mb/s and 10Mb/s.

Refer the Article : https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00038759en_us

Thank you

RamKS