1820667 Members
2797 Online
109626 Solutions
New Discussion юеВ

HPE Gen11 Rack mount

 
NateU
Occasional Contributor

HPE Gen11 Rack mount

Hi there all just wanted to ask the wider question about HPE rack mounts for Gen 11 Prolients, we just got our first ProLiant DL380 Gen11 and the rack has about and inch of space between the ears and the rack post is this normal?

or have we been supplied the wrong rail or something?

As you can see from arrow is the second photo that metal block is stopping the server going back further...

Thanks in advance

 

HPEGen11ears.jpgblockblock

2 REPLIES 2
Cali
Honored Contributor

Re: HPE Gen11 Rack mount

Hi,

there is a Screw under the Latch and to use this Screw, it should fit.

I have seen this if an SFF Server was mounted with LFF Rails or versa.

Cali

ACP IT Solutions AGI'm not an HPE employee, so I can be wrong.
Sham82
HPE Pro

Re: HPE Gen11 Rack mount

Hello,
please check below document:
https://support.hpe.com/hpesc/public/docDisplay?docId=sd00002197en_us&page=GUID-0326B7E8-F230-4C90-8558-06B06C5D2D50.html

Regards

HPE



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo