HPE ILO 4/5 SNMP configuration

[Whyre]

Hello,

I would like to know if i can use an LDAP account as a SNMP user  on ILO 4 / 5 on ProLiant DL380 Gen9 and Gen 10 ?

Thanks in advance.

[support_s]

System recommended content:

1. Advisory: HPE Agentless Management Service (AMSD) - SNMP Traps Are Not Sent From the Host to HPE Integrated Lights-Out 5 (iLO 5) Following an iLO Reset

2. HPE Integrated Lights Out (iLO 5) for Gen10 Servers - Configuring iLO Management Settings

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Whyre]

Hi,

The first link is not applicable, that's not my case.

I have already read the second link and i foudn nothing about setting up SNMP with an LDAP account.

Is someone had already that problematic ?

Sincelery.

[TVVJ]

Hello,

You may refer to iLO 4 User Guide and iLO 5 User Guide for instances where and LDAP can be used with iLO.

Regards,

[Whyre]

Greetings,

According to these links, i guess i cannot use an LDAP / AD Account for editing an SNMP account neither on ILO 4 not ILO 5.

Do you know another way to fetch info via an LDAP account ?

Sincerely.