HPE ML350 Gen10 3106 1P 16G 4LFF Svr/TV LAN DRIVER

[informatech]

Good evening to everyone. I am reconfiguring the server in question is not being able to install it with the intelligent provisioning due to the native controller, I used the installation cd of win srv 2016 and loaded the controller drivers from usb. after the installation of the operating system there are many unrecognized peripherals, including the network card. I tried to install the drivers on the site without success. Do you have any suggestions about it? Thanks in advance.

[Suman_1978]

Hi,

This server model has "Embedded 4-Port 1GbE HPE Ethernet 1Gb 4-port 369i Adapter " by default.  Here are the drivers for this adapter.
https://support.hpe.com/hpsc/swd/public/detail?sp4ts.oid=1010192788&swItemId=MTX_01c9942a089c4609a13be2c6cd

If you would like to update the firmware for this adapter, here is the link.
https://support.hpe.com/hpsc/swd/public/detail?sp4ts.oid=1010192788&swItemId=MTX_feae41247a304e808d6a663cd7

Thank You!
I am a HPE employee
_________________________________________
Was the post useful? Click on the white KUDOS! Thumb below.  Kudos is a way of saying thank you to a post.
// Useful Links for ProLiant Servers / Community FAQ / Rules of Participation / Servers Blog //

[Snakkob]

Hi HPE Employee,

What is the new link for these drivers, as I'm a bit annoyed that I have just bought a server I can't use because there are no network drivers available anywhere on the HPE support side, the only link I found was your post when googeling, and that is broken. Hope you can help me asap, and of course thanks in advance.

Rgs.
A frustrated viking

[BjornarEgde]

I also have this problem, and can't find the drivers for embedded ethernet adapter. The link provided by Suman_1978 only shows a heading saying "

"Drivers & software" 

without any content. I've also tried searching for drivers without success. Any updates on this would be greatly appreciated.