HPE ML350 Gen10 Old Firmware to latest Firmware

[jon_711]

Hello folks,

I have ML350 Gen10 running old firmware that was released in 2018 and windows server 2016. I did not do firmware update since 2018.

I am planning to install new MS Server 2019 and wanted to update all available firmware to current. What is the best option available for me right now?

1. downloading SPP. Gen10 Service Pack for ProLiant Version 2022.09.01.00+ Patch Bundle + Pensando 3.0 

2. Or Updating each individual devices that I see in iLo under Firmware Name and Version.

System currently runs on iLO 5 Ver 1.20 a nd System Rom U41 V1.46 which are pretty outdated firmware

Please kindly suggest best ways to update the firmware to current

Thank you

[support_s]

System recommended content:

1. HPE ProLiant Gen9 Servers - Troubleshooting Software Problems

2. Integrated Management Log Messages for HPE ProLiant Gen10, Gen10 Plus, and Gen11 servers and HPE Synergy

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[555-denoh]

Hello.

First up is iLO. Upgrade to relay version 1.48.
After that it will be updated to the latest version 3.00.
Please check the following site.

https://support.hpe.com/connect/s/softwaredetails?collectionId=MTX-8384f9a8878649da&softwareId=MTX_3c2cf4caaf6a46129fbf624ac3&tab=Installation+Instructions

After that, you will be able to do a firmware update using SPP202209 from the current version. 

Best Regards