HPE NS204i-p Gen10+ boot card on gen11 Servers

[dotmax]

Good day to everyone, i need to know if the "HPE NS204i-p Gen10+ boot card" , can work/is supported on the gen11 servers.

I see that there is a new card (HPE NS204i-u Gen11), but it seem really complicated (in iQuote, you have to order the card, the bracket, the cables, the heatsink, and remove the factory installed heatsink, !!!!!) for me it would way easy to install a pci-e card, like in gen 10....

Thank You

MAX

[support_s]

System recommended content:

1. HPE SimpliVity - HPE NS204i-p Gen10+ Boot Controller Missing from Boot Menu on Startup

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Sebasbin]

Hi,

HPE NS204i-p Gen10+ boot card is not supported for HPE Gen11 servers

Refer Below user guide 
https://support.hpe.com/hpesc/public/docDisplay?docId=sd00001830en_us&docLocale=en_US&page=GUID-BA7A79D9-915A-4492-A644-1313727D4050.html

[TVVJ · Accepted solution]

Hello,

You may refer to section "Key Features" on page 3 of QuickSpecs of the HPE OS Boot Devices which states that HPE NS204i OS Boot Devices supports Intel Gen10 and Intel and AMD Gen10 Plus platforms furthermore provides the support matrix as well.

Also, please refer to support matrix table for 200 series in the HPE NS204i Boot Device User Guide.

Regards,

[Sunitha_Mod]

Hello @dotmax,

Let us know if you were able to resolve the issue.

If you have no further query and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.