Hpe prolaint ml110 gen10 + SSD M.2 capacidad de 2T

[CesarMercado-IT]

Estoy armando un servidor para un SCADA. Voy a usar un disco ssd de 2T NVMe, marca ADATA SWORDFISH PCIe Gen3x4 M.2 2280. Tengo un adaptador PCIe donde coloco el disco, y luego lo pongo en los slot pci. Hasta ahi todo bien. Luego quiero instalar como sistema operativo Centos 9. Me reconoce el disco y demas. Comienzo la instalacion y a la mitad de la instalacion. Tira un error y se reinicia el servidor. Y arranca el proceso nuevamente de instalacion. Probe con Centos7, Centos8, Centos9 y Win10. Y hace los mismo. Porbe con otro disco, (igual al primero) ya que tengo uno de repuesto. Y hace exactamente lo mismo. 
Lei que puede ser no compatible los ssd M.2 con los proliant ml110 gen 10.
Nose como seguir.

Google Translated: 

Hpe prolaint ml110 gen10 + M.2 SSD 2T capacity
I am setting up a server for a SCADA. I am going to use a 2T NVMe SSD disk, ADATA SWORDFISH brand PCIe Gen3x4 M.2 2280. I have a PCIe adapter where I place the disk, and then I put it in the PCI slots. Until then everything is fine. Then I want to install Centos 9 as the operating system. It recognizes the disk and so on. I start the installation and halfway through the installation. It throws an error and restarts the server. And start the installation process again. Tested with Centos7, Centos8, Centos9 and Win10. And he does the same. Please with another disk, (same as the first one) since I have a spare one. And it does exactly the same thing.
I read that M.2 SSDs may not be compatible with the proliant ml110 gen 10.
I don't know how to continue.

[support_s]

System recommended content:

1. HPE ProLiant ML110 Gen10 Server - Option Parts

2. HPE ProLiant ML110 Gen10 Server User Guide

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Suman_1978]

Hi,

Translation

I am setting up a server for a SCADA. I am going to use a 2T NVMe SSD disk, ADATA SWORDFISH brand PCIe Gen3x4 M.2 2280. I have a PCIe adapter where I place the disk, and then I put it in the PCI slots. Until then everything is fine. Then I want to install Centos 9 as the operating system. It recognizes the disk and so on. I start the installation and halfway through the installation. It throws an error and restarts the server. And start the installation process again. Tested with Centos7, Centos8, Centos9 and Win10. And he does the same. Please with another disk, (same as the first one) since I have a spare one. And it does exactly the same thing.
I read that M.2 SSDs may not be compatible with the proliant ml110 gen 10.
I don't know how to continue.

What is the error it throws during installation?
Just check if your server supports CentOS or Win10

According to ML110 Gen10 QuickSpecs:
The S100i supports 10 ports as 2 additional ports are leveraged to support the M.2 option.
HPE Universal SATA 6G AIC HHHL M.2 SSD Enablement Kit 878783-B21

Please refer to the Cabling information from this user guide.  Page# 100 & 122

Thank You!
I work with HPE but opinions expressed here are mine.