HPE Proliant DL380 gen11 and CP1623 Card not detected

[saurabhchevli]

Dear Team,

I have server HPE Proliant DL380 Gen11.

I am facing issue of Siemens CP1623 card not detect on server. I have tried simatic net uninstall install.

I tried insert Card in primery and secondary both riser.

I tried bios setting of visulization disable.

i tried bios version v1.4 and 2.22.

I tried SPP update.

Regards,

Saurabh

[Sham82]

Hello Saurabh, 
Thank you for your post.

The Siemens CP1623 Card is a non- HPE Card and not been tested/supported by HPE.
we would not be able to comment on that.

We would suggest to use HPE recommended Hardware.
Please find below ( page 66) for supported Cards.
https://www.hpe.com/psnow/doc/a50004307enw.pdf?jumpid=in_pdp-psnow-qs

Regards
HPE

[saurabhchevli · Accepted solution]

Dear Sir,

I would like to inform that we now get Siemens SImatic CP1623 card detected in HPE Proliant DL380 gen11 server.

The setting is PCIe Device configuration--->Advanced PCie conifguration--->Maximum PCI Express Speed is change to PCIe generation 1.0

Regards,

Saurabh Chevli

[Sham82]

Hello Saurabh, 
That's wonderful!
Thank you for the update and for sharing your insights. We genuinely appreciate it.

Regards
HPE