HPE Proliant ML350 Gen 9 Drives

[mattpdx86]

I have a question for you, I have a HPE ML350 Gen 9 HP server, it comes with HP SAS 6gbps 300.0 GB in size, I have a friend who gave me 4 Seagate Savvio 10k 6gbps 600.0 GB drives. For some reason when I put them in the server, I run the storage administrator on the HP, but I can't format them I can clean them in windows Disk Management but can't format it. But i can see .t. All of the drives are in HBA, and not in RAID. I want to use these in place of the hp ones. What do I have to do to get them to work?

[support_s]

System recommended content:

1. HPE ProLiant ML350 Gen9 Server - LED Indicators

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Suman_1978]

Hi,

Non-HPE drives may or may not work as expected.

Please refer to the server QuickSpecs to see if the drive specs are compatible.  Page#7 & 27

Have you used Intelligent Provisioning to configure the drives?

Thank You!
I work with HPE but opinions expressed here are mine.
HPE Tech Tips videos on How To and Troubleshooting topics