HPE Smart Array P816i-a SR Gen10 changing box number

[echampetier]

Hi All,

I have 4 DL380 Gen10 servers with "HPE Smart Array P816i-a SR Gen10"

On 3 servers I have "Internal Drive Cage at Port 3I, Box 3, OK", on the 4th I have "Internal Drive Cage at Port 3I, Box 8, OK",

so my disk are named

 3I:8:1 (SAS HDD, 4.7 TB), 3I:8:2 (SAS HDD, 4.7 TB), 3I:8:3 (SAS HDD, 4.7 TB), 3I:8:4 (SAS HDD, 4.7 TB)

instead of

3I:3:1 (SAS HDD, 4.7 TB), 3I:3:2 (SAS HDD, 4.7 TB), 3I:3:3 (SAS HDD, 4.7 TB), 3I:3:4 (SAS HDD, 4.7 TB)

Is there any ways to rename box 8 in box 3?

Thanks

[sudhirsingh]

Hi,

Box number can not be changed manually, however Hard Disk Drive (HDD) functionality are not affected.

As a suggestion: 

- Disconnect HDD, HDD backplane and backplane cables ,

-Clear controller configuration from SSA,

-Reconnect HDD, HDD backplane and backplane cables .

Check the status,

If further assistance requried, Please raise a HW case.

Regards,

Sudhir

If you feel this was helpful please click the KUDOS! thumb below!