HPESmartArrayCmdlets v2.0 stopped working

[11-11OM]

We use HPESmartArrayCmdlets v2.0 for scripted configuration of devices during deployment and with out most recent 4510 purchase the commandlets seem to not be able to work with the device. I noticed that this new chassis comes with the MR Storage administrator and the SR storage administrator bits, in the firmware. 

When I use the HPESmartArrayCmdlets v2.0 to get the configuration I get the following in the statusinfo

Get-HPESAControllerConfiguration -Connection $ilo_sa

ControllerConfiguration : {@{ControllerLocation=Slot=0; ControllerModel=HPE Smart Array E208i-a SR Gen10}, @{ControllerLocation=Slot=2;ControllerModel=HPE Smart Array P408i-p SR Gen10}}

StatusInfo: @{Category=PropertySupportability; Message=The property or properties listed in AffectedAttribute are not supported on the specified slot. 
For more details see the Smart Array controller user guide.;                   AffectedAttribute=System.Collections.Generic.Dictionary`2[System.String,System.Collections.Generic.List`1[System.String]]}

The ControllerConfiguration data is populated with the controller and slot information but further using the drive commandlet states there are no controllers in that slot.

Get-HPESAPhysicalDrive -Connection $ilo_sa -ControllerLocation 'Slot 0'

StatusInfo : @{Category=Unavailability; Message=No Smart Array controller found at the specified location "Slot 0".}

Powershell module : https://www.powershellgallery.com/packages/HPESmartArrayCmdlets/2.0.0.0 

Is there a newer version of the HPESmartArrayCmdlets or a different powershell module that we should be using or a different scriptable application? The requirements for our scripting is that it must configure the target device before any operating system is installed and it must do so remotely.

Thanks in advance.

[11-11OM]

Disregard .. The problem turned out to be an unannounced upgrade from HPESmartArrayCmdlets 1.0.0.2  to v2.0 which caused the issue.

[ngnear]

Sure. If you require any further support, feel free to log a support case with us.