hpssacli ESXi. convert RAID 0 to RAID 10

[ShurikTM]

Hello all

I'm have a Proliant server with 410i controlles. The two physical SAS-drives by 1 Tb each are combined into one array RAID 0 with 2 Tb space. Some times ago I add two additional physical drives by 1 Tb each, but I can't have physical access to server now. With 'hpssacli ctrl all show config' I see new drives as unassigned.

I'n need to convert my existing aray RAID 0 to RAID 10. How do I do this?

I have error for command: 'hpssacli ctrl slot=4 ld 2 modify raid=10' because LD 2 do not have 4 physical drives.

If I add unassigned drive to existing artray RAID 0, then rebuild the array begins to increase its size

[Johan Guldmyr]

Hi!

Let it increase the array then modify the raid.

Pprhaps easier to find help if you search for the old name of hpssacli: hpacucli

http://h30499.www3.hp.com/t5/System-Administration/Migrate-RAID0-to-RAID1-online-with-hpacucli/td-p/4756838#.VPwvxM2UfCI for example