Hyper-V not running on DL385 Gen11 AMD

[ED_GO]

Hyper-V is not running due to necessating hardware DEP but I cant find it in the RBSU. No DEP, or NX

[TVVJ]

Hello,

In the "UEFI System Utilities User Guide for HPE ProLiant Gen11 Servers, and HPE Synergy" section "Changing Virtualization Options"
please refer to sections "BIOS/Platform Configuration Options > Changing Virtualization Options > and from options
a. Enabling or disabling Access Control Service
b. Enabling or disabling SR-IOV
c. Setting the Minimum SEV ASID
d. Enabling AMD I/O Virtualization Technology
e. Enabling or disabling AMD DMA Remapping
f. Enabling AMD 5-Level Page
g. Enabling or disabling ARM SMMU PMU

Start from "Enabling AMD I/O Virtualization Technology" and enable one after the other and see if it helps.

Also, if needed, you may enable the following processor settings from section "Changing Processor Options"

a. Setting the number of enabled processor cores
b. Enabling or disabling Processor x2APIC Support
c. Enabling AMD Simultaneous Multithreading (SMT)
d. Configuring Performance Determinism Options
e. Selecting AMD Page Table Entry Speculative Lock Scheduling options

Regards,

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.