ILO DL360 G5

[trdn]

how do i setup the ilo on my system.
the OS is already installed..

[Lmm_1]

Hello,

1. Prepareâ Decide how you want to handle networking and security

2. Connect iLO 2 to the network

3. If you are not using dynamic IP addressing, use the iLO 2 RBSU to configure a static IP address

4. Log into iLO 2 from a supported browser or command line using the default user name, password,and DNS name provided on the iLO 2 Network Settings tag attached to the server

5. Change the default user name and password on the administrator account to your predefined
selections

6. If you are using the local accounts feature, set up your user accounts

7 Install the iLO 2 device drivers "Installing iLO 2 device drivers

Check this document:

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00553302/c00553302.pdf

Regards,
Lmm