iLO monitoring directly via SCOM

[Lamont77]

Hi. I have been asked to look into a way to monitor HPE iLOs directly from SCOM. From the reading Ive done so far, it looks like the recommendation is to use an appliance called oneview, which sits in between SCOM and the Proliant iLO. 

Is there a way to send iLO alerts (hardware failure, logins etc) directly to SCOM instead of using an appliance? If so, can someone please let me know how this is done?

Im hoping its as easy as installing a management pack on the SCOM server (How do I know what version ?) and then configuring iLO to send SNMP to the SCOM server ?

Any help or advice here would be brilliant. Thanks  

[support_s]

System recommended content:

1. HPE iLO 5 1.40 User Guide | Using iLO with HPE OneView

2. HPE iLO 4 2.82 User Guide | Using iLO with HPE OneView

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[TVVJ]

Hello,

I am not sure about SCOM integration with iLO, but please review the following link and see if it helps:

https://support.hpe.com/hpesc/public/docDisplay?docId=sd00001174en_us&page=v35144117.html&docLocale=en_US

Regards,

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Lamont77]

I appreciate the replies, but none of them answer the question