Installing Windows NT Server 4.0 on HP DL360 G1

[TL33]

When installing Windows NT Server 4.0, the harddisks are not recognized.
When started with Smartstart 5.50, I'am not able to choose operating system within smartstart. Do I use the wrong smartstart version or is it another smartstart CD that I'm missing?

Any help would be great.

Cheers
TL

[Víctor Cespón]

SmartStart 5.5 is correct for a G1 server, if you enter the ACU in SmartStart, do you see the integrated SmartArray and the disks?
You can also try to install manually, providing the SmartArray driver on a diskette:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=254886&prodNameId=261261&swEnvOID=24&swLang=8&mode=2&taskId=135&swItem=MTX-UNITY-I15646

[TL33]

Hi!

Yes I can see the disk in the ACU.
But what I was looking for was an OS assisted ACU which you find in newer Smartstart versions, and I found out that this is not supported by version 5.50. The problem is that I don't have a diskette to copy the driver to and manually install it during NT 4.0 Server installation.
Got hold of a diskette, problem solved.

[pol901pol]

Hi there,
Do you still have the disk you used for the DL360 to install NT? I am looking for one. Thanks!!!

[Gary Antonio Benavides]

In the smart Start CD Homepage there should be an option "Deploy Server" this is in order to install the OS without loading the driver "F6".