HPE Community
ProLiant Servers (ML,DL,SL)
1847476 Members
2698 Online
110265 Solutions
New Discussion

Integrated Management Display

 
Martijn van Lune
Occasional Contributor

‎02-07-2003 05:35 AM

‎02-07-2003 05:35 AM

Integrated Management Display

I bought a IMD (271930-001). This number is also written in the service manual. When I came home the connector would not fit. The IMD I have has a connector as wide as a floppydisk connector. But on the backplane are 2 smaller connectors. Do I need another cable? Or do I have a bigger problem. Thanks in advance!
0 Kudos
Reply
3 REPLIES 3
JohnWRuffo
Honored Contributor

‎02-07-2003 06:03 AM

‎02-07-2003 06:03 AM

Re: Integrated Management Display

There are diferent versions of the display...
What server model and processor type/speed do you have?
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt
0 Kudos
Reply
Martijn van Lune
Occasional Contributor

‎02-07-2003 07:59 AM

‎02-07-2003 07:59 AM

Re: Integrated Management Display

It's an proliant 1600 - 233 mhz. single processor.
0 Kudos
Reply
JohnWRuffo
Honored Contributor

‎02-07-2003 09:39 AM

‎02-07-2003 09:39 AM

Re: Integrated Management Display

271930-001 is shown to be the correct part number for that box...
Send that one back and ask about part number: 122223-001. I am not sure if this IMD will work on a 1600, but it's worth asking about.
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.