Integrated Smart Array Contoller Error

[Ayman Altounji]

Received a 177 error at bootup, just after smart array initializes. I get the F1 and F10 prompts. Selecting either key results in blank screen with flashing cursor in upper left corner. will not even boot to CD or A: drive. Removing all disks will allow me to boot to DOS from floppy.

DiD I lose my RAID config and if I did, I assume I will need to rebuild and restore my NetWare server?

Please help.
Jay

[Ayman Altounji]

Still receiving the 177 error... BUT--thanks to a reply in the thread below--I pulled the RIB from the server and am now able to access my disk storage. Still need help with the 177 error.

Thanks,
Jay

[Ayman Altounji]

All that appears to be is a "configuration not complete" error... Have you run F10 Setup and actually saved the default setup?