Intelligent Provisioning DL380p G8 Problem

[MT_20]

Hello,

I have a problem with Intelligent Provisioning on DL380p G8.

After press F10 nothing happens (server displays prompt for a while and restarts)

I try to install  HP IP 1.4 1.5 1.6 1.62 unfortunately did not help

I installed SP and the same

Reset all BIOS settings, removed all the disk drives .. whatever I did effect is the same

F10 is not locked, but does not start Intelligent Provisioning

Does anyone have any idea what could be wrong / how can I fix it?

[RbBsmn]

You can try using the Intelligent Provisioning recovery media and try re-installing it:
http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=MTX_5e72b3c5f4074ddba61e67a0ec#tab3 

If this does not work, bring the server to a minimal configuration (sometimes a hardware component somehow prevents IP from starting) and see if it works then.

If not, I'm afraid it's time to get a new systemboard.

Just out of curiousity, did it used to work before?

Cheers,

Rob