ProLiant Servers (ML,DL,SL)
1846598 Members
1934 Online
110256 Solutions
New Discussion

interface provisioning bootet nicht mehr

 
Strauch
Frequent Visitor

interface provisioning bootet nicht mehr

Hallo Zusammen,
ich habe Problem mit interface provisioning. Ich habe einen Server HPE PROLiant DL380 Gen9 und möchte ein Raid konfigurieren. Der server startet und wenn ich dann interface provisioning starte, bekomme ich immer Fehler. Der Fehler ist (x64 Exception Type 0D - General Protection Exception. Hat jemand eine Idee, mir gehen langsam die Ideen aus. Ich würde mich auf Unterstützung sehr freuen.

Google Translated: 

Hello everyone,
i have problem with interface provisioning. I have an HPE PROLiant DL380 Gen9 server and want to configure a raid. The server starts and when I start interface provisioning I always get errors. The error is (x64 Exception Type 0D - General Protection Exception. Does anyone have an idea, I'm running out of ideas. I'd really appreciate any help.

5 REPLIES 5
pchops
HPE Pro

Re: interface provisioning bootet nicht mehr

[Apologies for not being able to reply in your native language (hopefully something like Google translate works for you)]

If you want or need to use Intelligent Provisioning, you could try the "Intelligent Provisioning Recovery Media" -- see:

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00028476de_de

If you only need to do a RAID configuration, as suggested by TVVJ in another post, you could use the "HP ProLiant Offline Array Configuration Utility" to configure your RAID device (presuming it is a Smart Array):

https://support.hpe.com/connect/s/softwaredetails?language=de&softwareId=MTX_3c888073127c4c65b7bd8559eb

I work for HPE
Strauch
Frequent Visitor

Re: interface provisioning bootet nicht mehr

Hallo

Ich habe es versucht zu flaschen. leider hat es nicht funtkioniert. da für ist ein neuer fehler aufgetreten. Embedded Flash/SD-Card ist schreibgeschütz und kann sie leider nicht vormatiren. Giebt es ne möglich keint wie ich das problem lösen kann.

Google Translated: 

Hi

I tried to bottle it. unfortunately it didn't work. a new error has occurred for this. Embedded Flash/SD card is write-protected and unfortunately cannot be pre-programmed. Is there any way I can solve the problem.

pchops
HPE Pro

Re: interface provisioning bootet nicht mehr

See this post -- you may have a similar situation.

I work for HPE
Strauch
Frequent Visitor

Re: interface provisioning bootet nicht mehr

@pchops 

Leider bekomme ich das Embedded Flash/SD-Card in gelöscht. ob ich es mit Windows server oder ILO selbst die Schieber auf Mainboard gehen nicht.

Google Translated: 

Unfortunately I get the embedded flash/SD card in deleted. whether I do it with Windows server or ILO even the sliders on the mainboard don't work.

pchops
HPE Pro

Re: interface provisioning bootet nicht mehr

If you are able to login to the iLO, what is the status of "iLO Health"? Also, are there any Integrated Management Log (IML) entries related to the embedded flash? It is possible that the iLO's embedded flash is bad, which would unfortunately require a system board replacement to repair.

Google Translated:

Wenn Sie sich bei iLO anmelden können, wie lautet der Status von „iLO Health“? Gibt es außerdem IML-Einträge (Integrated Management Log) im Zusammenhang mit dem eingebetteten Flash? Es ist möglich, dass der eingebettete Flash des iLO defekt ist, was leider einen Austausch der Systemplatine zur Reparatur erfordern würde.

I work for HPE