Issues with Embedded Sata RAID driver

[Deuce Towe]

I am attempting to install Windows 2000 Server on a HP ML110 G3 with Embedded SATA RAID driver for RAID 1 (mirroring).

Sata RAID is enabled, and works perfectly fine when using Windows 2003 Server. The drives are detected and I can get to the partition management portion of Windows 2003 Server setup. However, when using the Embedded SATA RAID driver for Windows 2000/Windows 2003 during the installation of Windows 2000 Server, setup cannot detect any disk drives.

Unfortunately, there are legacy applications that must be run explusively in a Windows 2000 environment, so installing a newer OS is not an option. As you can see on this product page, the Windows 2000 Server is listed as a supported Operating System:

http://h10010.www1.hp.com/wwpc/ca/en/sm/WF06a/12146350-12146352-12146638-12146638-12146640-12251664.html


Please link me the functional drivers for the HP Proliant ML110 G3 to allow installation of Microsoft 2000 Server using embedded SATA RAID 1 mirroring.

Thank you in advance.

[KarloChacon]

hi Deuce

there is not discussion W2000 is supported

but which driver are you using? can you give the name? or link?

are you using the same for W2003 and W2000? cp007490.exe (480 KB)?

just in case this this one
previous version
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=501887&prodNameId=3279679&swEnvOID=181&swLang=8&taskId=135&swItem=MTX-52475fe402f14d2c94196e955b&mode=3



regards