Latest SPP (2024.09) not working with iLO Amplifier Pack 2.23

[Richard49]

I have an environement of 40+ servers, Mainly DL360 Gen10 and ML350 Gen 10, that I need to keep updated to the latest SPP for contractual reasons.

After downloading the latest SPP 2024.09 and uploading it into iLO AMP Pack I'm unable to create a baseline report, iLO AMP Pack error's failing to initize the SUM in the baseline.

If I revert to SPP 2024.04 it works fine and I can creat a baseline report.

I can only think it's something wrong with SUM in the latest SPP.

If I run SUM inderpentantly outside of iLO AMP Pack I can Inventory systems and Deploy updates to target systems.

I'm not sure where to start looking.

Any thoughts help would be appriciated. 

[TQ12 · Accepted solution]

A vague assumption:
This is probably due to the fact that the iLO Amplifier Pack is discontinued by HPE and is no longer supported.
It is not available for download any longer.
Version 2.23 was pulled back / removed as far as I can remember.
All documentation that is still available is for 2.22 only.

https://support.hpe.com/hpesc/docDisplay?docLocale=en_US&docId=a00133620en_us

Cheers

[Richard49]

Thanks for that, does HPE Oneview work on a private airgapped system, off away from the internet ?

[support_s]

System recommended content:

1. HPE iLO Federation User Guide for iLO 5 | iLO Federation group firmware update

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Cali]

Yes, and you can deploy SP without a License now.

See my description here: HPE SPP Update with OneView 8 (itrunde.de)

Cali

[TQ12]

Possibly:
https://support.hpe.com/hpesc/public/docDisplay?docId=sd00004082en_us&docLocale=en_US

Cheers