Mapping logical drives to Windows disk numbers

[Village56]

Is it possible to work out how the logical drives on an array (as defined in the array config utility) map through to physical disks as shown in windows?

The properties of the physical disks under Windows show a location of "Bus Number #, Target Id #, LUN #", but I have not been able to map this back to a logical drive within the array config utility.

Any help would be much appreciated.

[Village56]

I have just managed to find the answer!

If you open the "System Management Homepage" and select storage you will get a list of the controllers in the server. From here, you can drill down into the logical drives on the various controllers and one of fields is "OS Name" - quite obvious when you know where to look! ;-)