Mirror on DL360G5 E200i RAID1

[SSC06]

I want to do mirror for hard desk on HP DL360G5 E200i controller, RAID1, but I’m getting this message “ACU didn’t detect any supported controller in your system”. Any help on this?
Thanks

[Michael A. McKenney]

Did you upgrade the firmware on the server? Do you have two identical drives installed on the controller. Did you install the proper drivers into the OS for the e200i to be seen? Check device manager in Windows or similar thing in Linux. If Windows, go into the controller in Device manger and update drivers using Windows update.

[SSC06]

I have three identical servers. I succeed to do the mirror for the first one but not the others. Yes I have two identical drivers,e200i driver is installed but I didnâ t upgrade firmware for any server. is there a difference between the servers as they have same firmware when do mirror
thanks

[LuckyP_1]

Please try to clear the NVRAM as well as update the system BIOS.

Check for the cable connection/remove-reconnect.

if issue still there, then may be we have a bad e200 on MB